Mini Fragment Set with Aluminium Box
Mini Fragment Set with Aluminium Box
| CODE | DESCRIPTION | QUANTITE |
| GMBTD1130.20.100 | Drill bit , 2.0mm diameter Q.C | 2 |
| GMBTD1130.27.130 | Drill bit, 2.7mm diameter Q.C | 2 |
| GMIBS700 | Small countersink 2.7mm | 1 |
| GMC-IBS762.27 | Tap for 2.7mm screws Q.C | 1 |
| GMIBS765 | Handle | 1 |
| GMIBS723.20 | Drill guide and drill sleeve for 2.0mm (Tripple Drill) | 1 |
| GMIBS721.35 | Tap sleeve 3.5mm diameter | 1 |
| GMILBS746.25 | Small hexagonal screwdriver shaft 2.5mm Tip | 1 |
| GMIBS709 | Depth gauge for small screws | 1 |
| Instruments for 1.5 and 2.0mm diameter screws | ||
| GMBTD1130.11 | Drill bit, 1.1mm diameter Q.C | 2 |
| GMBTD1130.15 | Drill bit, 1.5mm diameter Q.C | 2 |
| GMIBS700.02 | Mini countersink | 1 |
| GMIBS762.15 | Tap for 1.5mm screws | 2 |
| GMIBS762.20 | Tap for 2.0mm screws | 2 |
| GMILBS746.15 | Mini hexagonal screwdriver shaft 1.5mm Tip | 1 |
| GMIBS735.15 | Mini drill sleeve Combind 1.1/1.5mm | 1 |
| GMIBS710 | Mini depth gauge | 1 |
| General Instruments | ||
| GMREH1053 | Sharp hook | 1 |
| GMIBS771 | Holding clip for plates(2x2.0, 3x2.7) | 5 |
| GMIBS753 | Self-holding screw forceps | 1 |
| GMIBP630.02 | Bending iron for finger plate | 1 |
| GMBHF1239 | Holding forceps for small plates (2 M) | 1 |
| GMBHF1240 | Holding forceps for finger plates (1 M) | 1 |
| GMBHF1238P | Mini Reduction forceps with points | 1 |
| GMREH1064.06.160 | Small retractor, 6 mm | 1 |
| GMREH1064.08.160 | Small retractor, 8mm | 1 |
| GMREH1064.15.160 | Retractor for small fragments, with broad shank short | 2 |
| GMREH1068.03S | Small periosteal elevator with straight edge, 3mm2.7mm cortex screws spherical head, hexagonal socket | 1 |
| GM714.06 | 6mm | 5 |
| GM714.08 | 8mm | 5 |
| GM714.10 | 10mm | 5 |
| GM714.12 | 12mm | 5 |
| GM714.14 | 14mm | 5 |
| GM714.16 | 16mm | 5 |
| GM714.18 | 18mm | 5 |
| GM714.20 | 20mm | 5 |
| GM714.22 | 22mm | 5 |
| GM714.24 | 24mm | 5 |
| Small washers for 2.7mm screws Quarter tubular plates | 6 | |
| GM641.04 | 4 Hole | 2 |
| GM641.05 | 5 Hole | 2 |
| GM641.06 | 6 Hole | 1 |
| GM641.07 | 7 Hole | 1 |
| GM641.08 | 8 Hole | 1 |
| GM672.33 | L-plates:2 each oblique left, oblique right, 2.7mm x 3 Hole | 4 |
| GM672.41 | T-plates 2.7mm x 3 Hole | 4 |
| Implants 1.5 and 2.0 | ||
|
1.5mm cortex screw with hexagonal socket |
||
| GM717.06 | 6mm | 4 |
| GM717.07 | 7mm | 4 |
| GM717.08 | 8mm | 4 |
| GM717.09 | 9mm | 4 |
| GM717.10 | 10mm | 4 |
| GM717.11 | 11mm | 4 |
| GM717.12 | 12mm | 4 |
| GM717.14 | 14mm | 4 |
| GM717.16 | 16mm | 4 |
| 2.0mm cortex screws with hexagonal socket | ||
| GM716.06 | 6mm | 4 |
| GM716.08 | 8mm | 4 |
| GM716.10 | 10mm | 4 |
| GM716.12 | 12mm | 4 |
| GM716.14 | 14mm | 4 |
| GM716.16 | 16mm | 4 |
| GM716.18 | 18mm | 4 |
| GM716.20 | 20mm | 4 |
| Straight mini-plates 2.0mm | ||
| GM674.03 | 3 Hole | 2 |
| GM674.04 | 4 Hole | 2 |
| GM674.05 | 5 Hole | 2 |
| GM671.33-671.34 | Mini L-plates: 2 each oblique left, oblique right 2 x 2 Hole | 4 |
| GM671.41 | Mini T-plates 2mm x 2 Hole | 4 |
| GMPS911 | K. wire : 10 each of diam. 0.6/0.8mm, length 70mm | 20 |
| 10 each of diam. 1.0/1.25/1.6mm length 150mm | ||
| GMAGC1410 | Aluminium Graphic Case | 1 |
Find us on social media
Copyright 2019 Gabriel Medical. All Rights Reserved. Working to Elevate Healthcare Across the Globe is a trademark and Gabriel Medical, is a registered trademark of Gabriel Medical.