Small Fragment Set in Graphic Case
Small Fragment Set in Graphic Case
Small Fragment Set in Graphic Case
Instruments and implants for 3.5 and 4.0mm diameter screws
Aluminium case, brown, high, perforated includes
SET CONSISTING OF:
| GOS1408 | Small Fragment Implant & Instrument Set | |
| BTD1130.25.130 | Drill Bit, Dia. 2.5, Q.C. | 2 |
| BTD1130.35.130 | Drill Bit, Dia. 3.5, Q.C. | 2 |
| IBS700.03 | Counter Sink for 3.5, 4.0 mm Screw (6.0 Head) | 1 |
| C-IBS762.35 | Cortical Tap for 3.5 mm Screws, Q.C. | 2 |
| C-IBS762.351 | Cancellous Tap for 3.5 mm Screw Q.C. | 1 |
| C-IBS762.40 | Cancellous Tap for 4.0 mm Screws, Q.C. | 1 |
| IBS765 | Quick Coupling Handle | 1 |
| IBS721.35 | Tap Sleeve, 3.5 mm Diameter/Drill Sleeve 2.5 mm Diameter | 1 |
| IBS720.27 | Insert Sleeve Diameter 3.5 mm/2.7 mm | 1 |
| C-ILBS747.25 | Small Screwdriver, 3.5 mm | 1 |
| ILBS746.25 | Small Screwdriver Shaft, 2.5 mm Hex., Quick Coupling End | 1 |
| IBS709 | Small Depth Gauge | 1 |
| IBS775 | Neutral and Load Drill Guide, 2.5/3.5 mm | 1 |
| General Instruments | ||
| REH1053 | Sharp Hook | 1 |
| IBS771 | Holding Clip for Plates | 2 |
| IBS753 | Self-Holding Screw Forceps | 1 |
| IBP630.01 | Plate Bender for Small DCP | 2 |
| GOS124 | Bending templates, 5 and 7 holes, 1 pair | 2 |
| BHF1246.19 | Self-Centering Bone Holding Forceps,190 mm | 1 |
| BHF1245.17 | Reduction Forceps with points, 170 mm Thread Lock | 1 |
| BHF1248.17 | Reduction Forceps Serrated Thread Lock 170 mm | 1 |
| REH1064.06.160 | Small Retractor, 6 mm Width | 1 |
| REH1064.08.160 | Small Retractor, 8 mm Width | 1 |
| REH1064.15.160 | Retractor for Small Fragments, with Broad Shank Long | 2 |
| REH1068.06S | Small Periosteal Elevator, with Straight Edge, 6 mm Width | 1 |
| IMPLANTS | ||
| Cortex Screws, Diameter 3.5 mm | Units (each size) | |
| 713.10 - 713.28 | 10 mm - 28 mm (Increment of 2 mm) | 4 |
| 713.32 - 713.40 | 32 mm - 40 mm (Increment of 4 mm) | 4 |
| Cancellous Screws 3.5 mm, Fully Threaded | Units (each size) | |
| 725.12 - 725.30 | 12 mm - 30 mm (Increment of 2 mm) | 2 |
| 725.35 - 725.60 | 35 mm - 60 mm (Increment of 5 mm) | 2 |
| Cancellous Screws 4.0 mm, Short Thread | Units (each size) | |
| 723.12 - 723.30 | 12 mm - 30 mm (Increment of 2 mm) | 2 |
| 723.35 - 723.50 | 35 mm - 50 mm (Increment of 5 mm) | 2 |
| 759 | Washer 4 mm | 2 |
| One Third Tubular Plates | ||
| 639.02 | 2 Holes | 1 |
| 639.03 | 3 Holes | 1 |
| 639.04 | 4 Holes | 2 |
| 639.05 | 5 Holes | 2 |
| 639.06 | 6 Holes | 2 |
| 639.07 | 7 Holes | 1 |
| 639.08 | 8 Holes | 1 |
| Dynamic Compression Plates 3.5 mm | ||
| 617.06 | 6 Holes | 2 |
| 617.08 | 8 Holes | 2 |
| 617.1 | 10 Holes | 1 |
| T-plates with 3 Thead Holes 3.5 mm | ||
| 643.03 | 3 Holes | 1 |
| 643.04 | 4 Holes | 1 |
| 627 | T-plates, Oblique Angled 3.5 mm | |
| 627.03L | 3 Holes, Left | 1 |
| 627.03R | 4 Holes, Right | 1 |
| PS911D | Kirschner Wires, 10 each 1.25/1.6/2.0 mm Dia, Length 150 mm | 30 |
| Screw Rack | 1 | |
| AGC1408 | Aluminium Graphic Case | 1 |
Find us on social media
Copyright 2019 Gabriel Medical. All Rights Reserved. Working to Elevate Healthcare Across the Globe is a trademark and Gabriel Medical, is a registered trademark of Gabriel Medical.